MADRIX Forum

Hi cuthbec, Yes, you will need to create a corresponding remote configuration in MADRIX 5. The required function called "Deck A Place ID", "Deck B Place ID" or "Deck A Place ID + Fade" and "Deck B Place ID + Fade" The configuration would consist of 48 entries ...

Hi videoanger, There was an issue in an older MADRIX LUNA firmware, which leads to the MADRIX LUNA not appearing in the "MADRIX Device Configuration" menu. However this issue has been resolved some time ago. In order to update firmwares for MADRIX hardware devices, please use the MADRIX HA...

Hi Rasemi,

Please contact the Avolites support on regard to the network configuration.

Hi Alex_V,

To get it working you will need to use a "Storage Place Parameter Chaser" instead of the "Effect Parameter Chaser". You will find it right above the Storage Places (see image below). You can use the same steps as you did before.

Hi PLebegue, To further analyze the issue please send us the used MADRIX 5 setup and a logfile to info[at]madrix[dot]com. To save the logfile please start MADRIX and select "Tools" > "Logfile...", click the button "Save As..." and enter a name for the logfile. Thanks in...

Hi Alex_V, It is possible to set a "Start Frame" in the effect options in the effect. If you now use the Opacity Action "Restart" it is possible to "start" the effect with a given frame, once the opacity is set to 0 and than back to 255. As I'm not sure if this is what ...

Hi aseman011, Welcome to the MADRIX Forum. Natively this is not possible. That means you will need to create a macro to achieve this. If you need assistance please send us an e-mail to info[at]madrix[com] Here you will find the documentation: https://help.madrix.com/m5/html/script/index.html?hidd_fr...

Hi Eric, You will need to create a corresponding fixture profile with the Fixture Editor. The dimmer channel needs to be set "Fixed" with a "Default Value" of 255 and the FX should be also "Fixed" with a value of 0. You can build the fixture file yourself or you can sen...

Hi PLebegue, Could it be that the connected fixtures do not allow to receive a non-complete DMX universe, that means less than 512 channels? What happens if you activate "Full Frames" in the MADRIX 5 Device Manager? Therefore please navigate to "Preferences" > "Device Manage...

Hi mbarnstijn, Welcome to the MADRIX forum. Thank you for your request! For now you can use HTTP remote in order to control MADRIX 5 remotely with a building management system. Here you will find the HTTP documentation with all available commands: https://help.madrix.com/m5/httpremote/HttpRemoteCont...