MADRIX Forum

Hi Rincon, You need to have the different parts of your show saved as scenes on the different PLEXUS devices first. Here you can learn more about the Art-Net configuration of the PLEXUS: http://help.madrix.com/m5/html/plexus/hidd_live_mode_art_net.html Now the Master-Slave-Synchronization takes care...

Hi Rincon, The so-called "Master-Slave-Synchronization" allows you to trigger scenes simultaneously (at the same time) on several, different devices. Here you can learn more about the "Master-Slave-Syncronisation": http://help.madrix.com/m5/html/plexus/hidd_managing_devices_furth...

Hi SVW,

"SMD 5050" means that the housing of the LED is measuring 5mm x 5mm.
The number of channels is not derivable from this information.

Please have a look at the datasheet of the LED strip to gather the information.

Thank you.

Hi SVW, You would need: - A PC with MADRIX and a MADRIX 5 KEY. - An Art-Net/sACN to SPI interface (which supports WS2812B). I highly recommend to use our MADRIX NEBULA, which is a reliable 2 port SPI pixel tape driver/interface. Each NEBULA drives up to 1360 RGB pixels and allows you to directly con...

Hi Calle, First I need to say, that MADRIX is rendering on the CPU, therefore the performance of the GPU is less important. That means you should give the priority to the CPU. Please note: The needed PC power doesn't only depend on the desired output universes/channels and thus can vary greatly. It ...

Hi Tom,

Thank you for providing the information.
We will further analyze the issue and keep you updated!

Thank you for your patience.

Hi Tom, Can you please send us a MADRIX 5 logfile via e-mail to info[at]madrix[dot] com when the used MADRIX KEY is connected? To save the logfile please go in MADRIX to "Tools > Logfile" (you can also click the "F6" key at our keyboard, click the button "Save As..." (i...

Hi andrewpsyc,

Yes this is possible, please send us an e-mail to info[at]madrix[dot]com regarding this matter.

Thanks in advance!

Hi Rincon,

Unfortunately this won't work. You will need to have the MADRIX KEY connected, if you want to have data output from MADRIX.

Another option would be to use MADRIX without a MADRIX KEY in "Demo Mode", with the downside that you won't have any data output to your fixtures.

Hi kangnguyen, After selecting the background image, you need to change the "View" from "Background Image" back to "Voxel Map". In the next step, you can align your fixtures on the grid according to the background image. The background image should help you with the pla...