MADRIX Forum

Hi PLebegue, Could it be that the connected fixtures do not allow to receive a non-complete DMX universe, that means less than 512 channels? What happens if you activate "Full Frames" in the MADRIX 5 Device Manager? Therefore please navigate to "Preferences" > "Device Manage...

Hi mbarnstijn, Welcome to the MADRIX forum. Thank you for your request! For now you can use HTTP remote in order to control MADRIX 5 remotely with a building management system. Here you will find the HTTP documentation with all available commands: https://help.madrix.com/m5/httpremote/HttpRemoteCont...

Hallo Holger, Schau dir dazu am besten die folgenden Tutorials an: https://youtu.be/t9Yl_lk9KZQ?si=jZoHXDbEyTWn9SBM https://help.madrix.com/tutorials/m5/HTML/hidd_remote_control_via_midi.html https://help.madrix.com/tutorials/m5/HTML/hidd_changing_a_predefiend_midi_map.html https://help.madrix.com/m...

Hallo Holger, Nein das geht leider nicht, MADRIX 5 verwendet immer den UDP Port 6454 [0x1936]. Dies ist auch vom Art-Net Standard so vorgesehen. Im Standard gibt es dazu ein extra Kapitel "Port", in welchem folgender Satz steht: Port: Actual data transmission on Art-Net uses the UDP protoc...

Hallo Holger, es scheint ganz so als würde die "PC Dimmer" Software den Port 6454 (Art-Net port) exklusiv verwendet. Das heißt dann leider auch, dass du keine zweite Software (z.B. MADRIX 5) verwenden kannst um über Port 6454 Daten zu senden. MADRIX 5 hingegen verwendet den Port nicht exkl...

Hallo Holger,

kurze Anmerkung:
Es gibt noch einen weiteren Weg. Du kannst die Kanalreihenfolge / Farbreihenfolge auch direkt über die MADRIX NEBULA Webkonfiguration verändern. Die entsprechende Einstellung nennt sich "Channel Order".

Hi Dadocivic,

Thank you for the update.

Yes, for some LEDs / ICs it is necessary to adjust the number of "channels per universe".

Hi webcentrik,

Thank you for your report.

Which MADRIX HARDWARE MANAGER version do you use ('Help' > 'About...')?
To further analyze the issue please send us all logfiles from the AURA sd card and white scene, which seems to cause the issue.

Thanks in advance!

Hi Ismal,

Thank you for sharing the screenshot.

In my last reply I forgot to add that there is a "Quantization" Filter available. This filter is available for Deck A and B (FX button) and the output. I recommend to test if this solves the color issues. Does the filter help?

Hi Pecotic, This error indicates that MADRIX 5 was not able to send data (or to open the required network socket). This could be caused for example by one of the following things: - The used network cable from the PC to the interface might be damaged. Some of the network cards will be deactivated by...