3d tube programming
3d tube programming
i have tied in a row of 10 tubes
so in all 16 channels
i have art-net 16x512
the next question is:
do i need to program each tube with dmx writing??
so in all 16 channels
i have art-net 16x512
the next question is:
do i need to program each tube with dmx writing??
Re: 3d tube programming
Hello Gazda,
When you want to control each of the desired DMX fixtures indiviually, you have to assign a unique DMX start address for every fixture in the MADRIX patch as well as at the real fixture.
If you there is no display at the desired fixture, often an "addressing tool" will be provided from the manufacturer of the fixture.
When you want to control each of the desired DMX fixtures indiviually, you have to assign a unique DMX start address for every fixture in the MADRIX patch as well as at the real fixture.
If you there is no display at the desired fixture, often an "addressing tool" will be provided from the manufacturer of the fixture.