Enttec Open DMX
Enttec Open DMX
I am running Madrix 5.1 basic. Have you removed support for the Enttec Open DMX device for DMX output or am I just missing it? I don't see options for FTDI devices under the "Devices USB" anymore. It would be nice if I didn't need to downgrade back to 3.6 just so I can use this device.
Re: Enttec Open DMX
Hello tech108,
Since the release of MADRIX 5 the support of thirdparty "USB to DMX" interfaces has been discontinued.
When you want to use "USB to DMX" interfaces, you can use all MADRIX DMX interfaces.
Of course MADRIX 5 supports the connection to all Art-Net and sACN interfaces which are working accroding to the Art-Net or sACN standard.
Since the release of MADRIX 5 the support of thirdparty "USB to DMX" interfaces has been discontinued.
When you want to use "USB to DMX" interfaces, you can use all MADRIX DMX interfaces.
Of course MADRIX 5 supports the connection to all Art-Net and sACN interfaces which are working accroding to the Art-Net or sACN standard.