Glitch and unstable flashes
Moderator: MADRIX Team
-
santanas-savannahs
- Posts: 2
- Joined: Tue Oct 30, 2012 1:58 pm
Glitch and unstable flashes
Hi I have a Eurolite custom Made DVI curtain 64 long by 80 led wide and I used Genaric 1 RGB set to 80 by 64 and after T9 is good try to use and it glitches on top 1 or 2 rows of curtain and makes pattern jumpy? have reste software 2 times using Windows 7 ro on computers laptop and Desktops with Pro video cards. loosing my mind? Any Ideas? 
Re: Glitch and unstable flashes
Hello santanas-savannahs,
.
We are sorry that you are experiencing this issue.
The problem occurs when MADRIX 3.4 is connected to a T9 LSD AIO controller with firmware version 15.15.
It will be fixed in the next MADRIX version (MADRIX 3.5).
.
To avoid this issue until the new MADRIX version is released, please use MADRIX 3.3b:
http://www.madrix.com/download/MADRIX_F ... l_3_3b.exe
.
We are sorry that you are experiencing this issue.
The problem occurs when MADRIX 3.4 is connected to a T9 LSD AIO controller with firmware version 15.15.
It will be fixed in the next MADRIX version (MADRIX 3.5).
.
To avoid this issue until the new MADRIX version is released, please use MADRIX 3.3b:
http://www.madrix.com/download/MADRIX_F ... l_3_3b.exe
-
santanas-savannahs
- Posts: 2
- Joined: Tue Oct 30, 2012 1:58 pm
Re: Glitch and unstable flashes
Hi. Thanks for the reply, was told to use the 3.3b version, Now works with out a glitch. We are fine for now. Thanks 