how setup robe stage qube

Write here what nice effects or shows you have done with MADRIX or ask other users.

Moderator: MADRIX Team

Locked
User avatar
dieter
Posts: 84
Joined: Tue Aug 19, 2008 3:47 pm

how setup robe stage qube

Post by dieter »

Hi,
I have problem to setup MADRIX.
I have rent for a show at next weekend robe stage qube.
I have enable robe stage cube in options device network and MADRIX have found all panels at the next restart.
My problem: I can't control all pixel of the panel. All pixel at left side of the panel are ok, but at the right side I can only control 9 pixel.

I have install different version of MADRX an tested.
I have more then 5 create a new patch.
I have check the network and ping all robe stage qube and all say ok.

I have no more ideas.

Can anybody help my?
User avatar
Wissmann
Developer
Developer
Posts: 774
Joined: Fri Feb 23, 2007 3:36 pm
Location: Germany
Contact:

Re: how setup robe stage qube

Post by Wissmann »

Hi dieter,
.
it sounds like you patched !generic RGB fixture instead of Robe StageQube 324.
.
Please check this out.
LEDs are nothing without control ;-)
User avatar
dieter
Posts: 84
Joined: Tue Aug 19, 2008 3:47 pm

Re: how setup robe stage qube

Post by dieter »

Hi Wissman,

yes thats is it.
I have changed in my patch and set to ROBE stage qube 324.
Now its running and the show can start.
THX

I have another 2 questions for ROBE stage qube 324.

1:
I'm surprised this Fixture have more than 512 channels.
How can I this control with normaly DMX?

2:
How I can view all channels of one robe stage qube 324?
The build in DMX watcher from MADRIX show only the first 512 channels of the one ROBE StageQube 324. I can't found the rest of the channels from the ROBE robe stage qube 324?
User avatar
Wissmann
Developer
Developer
Posts: 774
Joined: Fri Feb 23, 2007 3:36 pm
Location: Germany
Contact:

Re: how setup robe stage qube

Post by Wissmann »

Hi Dieter,
.
fine it is working now for you.
.
Yes the Robe Stage Qubes 324 have 18 by 18 rgb pixel which makes a total amount of 972 channels if it would be controled by DMX512.
.
But the INSTA 2022 and the Robe Stage Qube 324 are controled by a special network protocol which is not DMX512, it is more simmilar to Art-Net or KiNet but not the same.
We are proud to be able to support this protocol.
So it is not possible to control the Stage Qubes with a standard DMX512 control solution of several reason. Do for example the Stage Qubes provide a white balance feature which is handled by the network protocol as well.
Also it is necessery to set up a DHCP server for fixed installations, so the Stage Qubes get always the same IP address based on there MAC address.
For this you have two options, either using a hardware router where you setup the IP´s for the MAC´s or using a software router like TFTP to do this.
.
Regarding the DMX Watcher....
.
Oh oh, it´s a shame, we have to own up while developing the DMX Watcher we haven´t think about the Robe Stage Qubes or the GLP DMX1024 (used by ion tubes)
So we will fetch it up now ;-)
.
Ones again thank you very much for your comments and hints!!
LEDs are nothing without control ;-)
User avatar
dieter
Posts: 84
Joined: Tue Aug 19, 2008 3:47 pm

Re: how setup robe stage qube

Post by dieter »

Sorry for late answer,
I was on tour with some very great bands :-)
Was a great tour, No sleep. Under a lot of stress. But MADRIX running ever and there updates are big, bigger, biggest :-)
M$ system are bad :-(

I love this simple software. Ever have run If I needed.
User avatar
Wissmann
Developer
Developer
Posts: 774
Joined: Fri Feb 23, 2007 3:36 pm
Location: Germany
Contact:

Re: how setup robe stage qube

Post by Wissmann »

Thank you so much for this kind words !
LEDs are nothing without control ;-)
Locked