wiring the led strip to artnet
Moderator: MADRIX Team
-
chuck-kern
- Posts: 1
- Joined: Thu Apr 02, 2015 7:04 pm
wiring the led strip to artnet
how do i wire the led strip lights to the dmx out on the artnet node 8 dmx
there is 3 pins on the artnet dmx
pin one = ground
pin two = +data
pin three = -data
on the led strip there is
red = +5volt
black = ground
what are the blue and green? data and clock wired to on the artnet pins
chuck
there is 3 pins on the artnet dmx
pin one = ground
pin two = +data
pin three = -data
on the led strip there is
red = +5volt
black = ground
what are the blue and green? data and clock wired to on the artnet pins
chuck
Re: wiring the led strip to artnet
Hello chuck-kern,
Welcome to the MADRIX forum.
.
When you want to connect a DMX interface like an Art-Net node to a desired fixture you have to make sure that the fixture is able to receive DMX signals.
The described LED stripe seems not to be able to receive DMX signals.
.
But some of such LED stripes can be controled via DMX when you will used an additional DMX to SPI converter.
Welcome to the MADRIX forum.
.
When you want to connect a DMX interface like an Art-Net node to a desired fixture you have to make sure that the fixture is able to receive DMX signals.
The described LED stripe seems not to be able to receive DMX signals.
.
But some of such LED stripes can be controled via DMX when you will used an additional DMX to SPI converter.